Electronic Attack Mission

Tekever AR3

All missions
  1. Mission Start
  2. Step 1
    The Mission Operator receives the tasking
    ATLAS Mission Operator
  3. Step 2
    The Mission Operator creates the mission plan to take the vehicle to the Start Point (SP)
    ATLAS Mission Operator
  4. Step 3
    The launch operator prepares the AR-3 at the launch site and loads the BriteStorm system
    Brite Storm Launch Operator Tekever AR-3
  5. Step 4
    The Mission Operator launches the AR-3
    ATLAS Mission Operator Tekever AR-3
  6. Step 5
    The AR-3 gets to its Launch Position and completes a self-check of telemetry systems
    CUBE Autopilot — sourced from Taiwan, United States
    CUBE Autopilot Tekever AR-3 Telemetry Tx/Rx
  7. Step 6
    The AR-3 gets to its Launch Position and completes a self-check of navigation systems
    CUBE Autopilot — sourced from Taiwan, United States; HerePro GPS — sourced from Taiwan
    CUBE Autopilot HerePro GPS Tekever AR-3
  8. Step 7
    The AR-3 gets to its Launch Position and completes a self-check of mission systems
    CUBE Autopilot — sourced from Taiwan, United States
    Brite Storm CUBE Autopilot Tekever AR-3
  9. Step 8
    The AR-3 gets to its Launch Position and completes a self-check of communications systems
    CUBE Autopilot — sourced from Taiwan, United States
    CUBE Autopilot Communications Tekever AR-3
  10. Step 9
    The AR-3 sends a confirmation signal to the GCS
    HereLink — sourced from China
    HereLink Tekever AR-3
  11. Step 10
    The AR-3 navigates to its SP
    CUBE Autopilot — sourced from Taiwan, United States; HerePro GPS — sourced from Taiwan
    CUBE Autopilot HerePro GPS Tekever AR-3
  12. Step 11
    The mission Operator contacts the EW Mission Controller
    EW Mission Controller Mission Operator
  13. Step 12
    The EW Mission Controller takes control of the AR-3
    EW Mission Controller Tekever AR-3
  14. Step 13
    The EW Mission Controller initiates the search for the targeted radar system
    Communications — sourced from Canada, Norway, Singapore, United States
    Brite Storm Communications EW Mission Controller Tekever AR-3
  15. Step 14
    The EW Mission Controller identifies the target radar
    Communications — sourced from Canada, Norway, Singapore, United States
    Brite Storm Communications Tekever AR-3
  16. Step 15
    The EW Mission Controller selects the desired effect on the target radar
    Communications — sourced from Canada, Norway, Singapore, United States
    Communications EW Mission Controller Processor Tekever AR-3
  17. Step 16
    The EW Mission Controller confirms that the payload is emitting
    Communications — sourced from Canada, Norway, Singapore, United States
    Communications EW Mission Controller Processor Tekever AR-3
  18. Step 17
    The EW Mission Controller confirms with external agencies that the target radar is being affected
    EW Mission Controller
  19. Step 18
    The EW Mission Controller ceases jamming of the target radar
    Communications — sourced from Canada, Norway, Singapore, United States
    Communications EW Mission Controller Processor Tekever AR-3
  20. Step 19
    The EW Mission Controller informs the Mission Operator that the task is complete and the AR-3 is to be recovered
    EW Mission Controller Mission Operator
  21. Step 20
    The Mission Operator instructs the AR-3 to recover
    CUBE Autopilot — sourced from Taiwan, United States
    ATLAS CUBE Autopilot Communications Mission Operator Tekever AR-3
  22. Step 21
    The AR-3 returns to the launch site and lands
    CUBE Autopilot — sourced from Taiwan, United States; Cube ID_CAN — sourced from Taiwan; Lidar — sourced from South Africa
    CUBE Autopilot Cube ID_CAN IR-LOCK sensor Lidar Tekever AR-3
  23. Step 22
    The maintainer conducts post-flight checks on the AR-3
    Maintainer Tekever AR-3
  24. Step 23
    The Maintainer refuels the AR-3 ready for the next mission
    Maintainer Tekever AR-3
  25. Mission Complete